Decodes the LPCM variant found in DVD-Audio AOB streams. Unlike
DVD-Video LPCM it supports up to 192 kHz sample rates and splits
channels in two channel groups, which may use different quantization.
Samples are grouped in sets of 2 samples over all channels, with the
second channel group's data stored first within each set, as 16-bit
big-endian most significant parts followed by the remaining bits.
Based on information from expired US 6,580,671 patent et al.
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Extend the internal CUDA frames context (CUDAFramesContext) to manage
block-linear CUarray surfaces alongside the existing pitched-linear
allocations.
When the frames context format is AV_PIX_FMT_CUARRAY, the caller
(e.g. NVDEC) can fill cuarray_desc and cuarray_num_surfaces before
calling av_hwframe_ctx_init(), which then allocates the CUarray
surfaces.
Also add cuda_transfer_data_from_cuarray() to support hwdownload
from CUarray frames to host memory via cuMemcpy2DAsync.
Co-authored-by: Diego de Souza <ddesouza@nvidia.com>
Signed-off-by: Diego de Souza <ddesouza@nvidia.com>
Add a new hardware pixel format representing opaque block-linear CUDA
arrays (CUarray). This format is used by NVDEC when decoding into
opaque surfaces registered with cuvidRegisterDecodeSurfaces, and can
be consumed directly by NVENC as CUDA array input without requiring
a pitch-linear copy.
Signed-off-by: Diego de Souza <ddesouza@nvidia.com>
Useful for formats where they provide the downmix matrix in the bistream rather
than scale factors for channel groups.
Signed-off-by: James Almer <jamrial@gmail.com>
This allows constraining the set of available backends. This serves as a
better replacement for the "unstable" flag, which is a bit ambiguous. Allows
users to, for example, opt into the memcpy or x86 backend, while excluding
e.g. the upcoming JIT backends.
Signed-off-by: Niklas Haas <git@haasn.dev>
These are needed for interop with e.g. libplacebo, which needs to know the
correct flags to call vkGetDeviceQueue2.
Signed-off-by: Niklas Haas <git@haasn.dev>
It's been replaced with AVStreamGroupLayeredVideo, which is functionally the
same while generic enough to be shared with other kinds of layered video
implementations.
Signed-off-by: James Almer <jamrial@gmail.com>
Carries a raw HEVCDecoderConfigurationRecord for the Dolby Vision
enhancement layer, parsed from the hvcE box (ISOM) or the corresponding
BlockAdditionMapping (Matroska).
av_program_add_stream_index() added in 526efa1053
may fail to carry out its purpose but the lack of
a return value stops callers from catching any error.
Fixed in new function.
This incorrectly lists the libavcodec major version as 60 instead of
62. Also fix the date and commit hash while at it
Fixes: 7faa6ee2aa ("libavformat/matroska: Support smpte 2094-50 metadata")
Signed-off-by: llyyr <llyyr.public@gmail.com>
SMPTE-2094-50 is an upcoming standard that is close to being
finalized.
Define a side data type for carrying this metadata. And add
functions for parsing and writing it. This is very similar to
the handling of HDR10+ metadata.
The spec is available here: https://github.com/SMPTE/st2094-50
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Another step towards a cleaner API, with a cleaner separation of purposes.
Also avoids wasting a whopping one third of the flag space on what really
shouldn't have been a flag to begin with.
I pre-emptively decided to separate the scaler selection between "scaler"
and "scaler_sub", the latter defining what's used for things like 4:2:0
subsampling.
This allows us to get rid of the awkwardly defined SWS_BICUBLIN flag, in favor
of that just being the natural consequence of using a different scaler_sub.
Lastly, I also decided to pre-emptively axe the poorly defined and
questionable SWS_X scaler, which I doubt ever saw much use. The old flag
is still available as a deprecated flag, anyhow.
Sponsored-by: Sovereign Tech Fund
Signed-off-by: Niklas Haas <git@haasn.dev>
Some video codecs are not meant to output frames on their own but to be applied
on top of frames generated by other codecs, as is the case of LCEVC, Dolby Vision,
etc. Add a codec prop to signal this kind of codec, so that library users may know
to not expect a standalone decoder for them to be present.
Signed-off-by: James Almer <jamrial@gmail.com>
It is only used by the MPEG-2 encoder, so replace it
by a private option instead. Use a more elaborate term
for it: intra_dc_precision ("dc" could be anything).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Allows users to test if a given hardware pixel format is supported by swscale.
This is only a rough heuristic anyways, because the actual support may
depend on the specific *combination* of frame attributes, and ultimately
is better served by the `sws_test_frame` and `sws_frame_setup()` APIs anyways.
Sponsored-by: Sovereign Tech Fund
Signed-off-by: Niklas Haas <git@haasn.dev>
Said function has presumably been added in order to check
that we have successfully reset the floating point state
after having violated the ABI/calling convention by not
issuing emms in our MMX DSP routines.
Yet the ability to check this should not have been made public,
because there is no external need for it and because the
function does not even always achieve what its documentation
claims to do: It only works when inline assembly is available.
It should have been implemented in emms.h like emms_c()
(which is where a replacement should be put if there is still
ABI-violating MMX code when av_assert0_fpu() is removed).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add a public API for producing RFC 4281/6381 codecs trings for
MIME types.
This can be required for providing alternative video files to
a web browser, letting the browser pick the best file it supports.
Such strings also allow querying a browser whether it supports
a certain codec combination.
Finally, if implementing a DASH/HLS segmenter outside of libavformat,
one also has to generate such strings.
Generating such strings for H264/AAC is very simple, but for
more modern codecs, it can require a lot of nontrivial codec
specific parsing of extradata.
As libavformat already implements this, expose it for users as well.
The old, internal function ff_make_codec_str is kept and used by
the HLS and DASH muxers; the old function takes a logging context
which can be used for logging auxillary info about how the string
generation worked out.
These provide a way for apps that initialize Vulkan themselves to know
which extensions we may be able to use without having to hardcode it.
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
It's a name that communicates its functionality in a better way.
Since the function was introduced very recently, we can safely rename it.
Signed-off-by: James Almer <jamrial@gmail.com>
Normally, this function tries to make sure all threads are saturated with
work to do before returning any frames; and will continue requesting packets
until that is the case.
However, this significantly slows down initial decoding latency when only
requesting a single frame (to e.g. configure the filter graph), and also
wastes a lot of unnecessary memory in the event that the user does not intend
to decode more frames until later.
By introducing a new `flags` paramater and a new flag
`AV_CODEC_RECEIVE_FRAME_FLAG_SYNCHRONOUS` to go along with it, we can allow
users to temporarily bypass this logic.
Kacper Michajłow
Romain Beauxis
Timo RothenpielerandDiego de Souza
James Almer
Vignesh Venkat
Michael Niedermayer
Andreas Rheinhardt
Lynne
Niklas Haas
Marvin Scholz
Gyan Doshi
llyyr
Dmitrii Ovchinnikov
Zhao ZhiliandMartin Storsjö
Shreesh Adiga
Cameron Gutman